Traveler Hot Spot - NEX-GEN Custom Hot Spots

We are the Exclusive U.S.A. Dealer of the “NEX-GEN” Custom Hot Spots Line.

TRAVELER Release Date: 06-07-2019

***Form Factor: 100MM W / 82MM D /82MM H
……Weight: 5oz (13.5oz total shipping weight)

*** DMR, D-Star, Fusion, P-25, NXDN Ready !!!
*** BUILT IN AUTO CONNECT WIFI . . . .
*** Comes 100% PLUG & PLAY Programmed for your radio
*** Matte finish, non-glare finish
1. SMA Antenna + Internal Ceramic Antenna – Standard
2. Huge Main HEAT SINK – Standard
3. 3.2″ Genuine NEXTION Display

We employ a 7 step QC process on all builds to assure we maintain the high standards of all custom Hot Spots.

1. Images are tested on a pi-3B testing platform

2. J-Hats are tested on another pi-3B testing platform

3. Pi-0w/ Hats / Images are then tested as a unit after custom soldering

4. Current draw is tested to assure soldering is 100% good

5. New builds are burned in for 24 hours before shipping.

6. Images are then custom programmed for customer WIFI connection(s)

7. Pi-Star dashboard is verified ALL GREEN connect indicators (tested in DMR mode

Modes: DMR, DMR+, D-Star, Fusion, P-25, NXDN

100% PLUG & PLAY ready straight out of the box in DMR mode

* Unit AUTO searches for any pre-programmed WIFI internet connection for seamless “Shack to Mobile” use

Will cross mode between DMR+ Fusion, and with the correct Braandmiester reflector, DMR can bridge to D-Star.

PRESS to PLAY

*** Mouse over slide show to freeze any image . . .

Raspberry Pi0-W Motherboard (only) Technical Specs . . .

On board WiFi and Bluetooth
Broadcom BCM2835 1GHz processor with 512MB RAM
Mini HDMI and USB On-The-Go ports
Micro USB power port
40-pin GPIO connector (20 populated)
8 gb Scandisk or Kingston micro SDHC card included !
SABRENT power cable included

Printed + real time updated on-line instructions included

Note: these units are perfectly suited and in fact specifically designed for the radio operators whom desire a 100% WORKING hot spot out of the box and are not interested in soldering, de-soldering, disk formatting, image burning, configuring a STABLE pi-star software image, bench testing, trouble shooting, and/or generally “fighting tooth and nail” with a fresh new hot spot configuration just to simply talk on and enjoy using their radio transceiver. So hams that truly value their time and wish to avoid all the typical hair pulling set up aggravation issues that flood the various on-line ham radio support pages daily, this unit is specifically designed and BUILT WITH YOU IN MIND🙂

MSRP $239.95

“NEX-GEN” Custom Hot Spots Line.

Contact: Bobby @ +1-858-568-6673

email: rc@c-mediagroup.com

BUY NOW: CLICK HERE

Join us on Facebook !!!
www.facebook.com/groups/159237394737919/