XD4 Portable Spot II - NEX-GEN Custom Hot Spots

We are the Exclusive U.S.A. Dealer of the “NEX-GEN” Custom Hot Spots Line.

XD4 II Official Release Date: 09-03-2018

***Form Factor: 70MM L / 35MM W / 28MM H
……Weight: 2oz

*** DMR, D-Star, Fusion, P-25, NXDN Ready !!!
*** BUILT IN AUTO CONNECT WIFI . . . .
*** Comes 100% PLUG & PLAY Programmed for your radio
*** ALL High Quality “CAST ACRYLIC”, not cheap extruded acrylic !!!
1. SMA Antenna + Internal Ceramic Antenna – Standard
2. All NEW Convection Plus COOL Air flow CASE design
3. Huge Main HEAT SINK – Standard
4. Display (OLED .96″) Standard
5. Florescent Green acrylic inserts – OPTION
6. New FROSTED edge clear acrylic laser cut finish
7. HDMI port – can be used as a portable APRS mini-computer web browser with accessories and a quick 10 second image swap !!!

We employ a 7 step QC process on all builds to assure we maintain the high standards of all custom Hot Spots.

1. Images are tested on a pi-3B testing platform

2. J-Hats are tested on another pi-3B testing platform

3. Pi-0w/ Hats / Images are then tested as a unit after custom soldering

4. Current draw is tested to assure soldering is 100% good

5. New builds are burned in for 24 hours before shipping.

6. Images are then custom programmed for customer WIFI connection(s)

7. Pi-Star dashboard is verified ALL GREEN connect indicators (tested in DMR mode

Modes: DMR, DMR+, D-Star, Fusion, P-25, NXDN

100% PLUG & PLAY ready straight out of the box in DMR mode

* Unit AUTO searches for any pre-programmed WIFI internet connection for seamless “Shack to Mobile” use

Will cross mode between DMR+ Fusion, and with the correct Brandmiester reflector, DMR can bridge to D-Star.

09-22-19 Update . . . . Available Colors, see options section, same price as the RUGGED SPOT and COMMANDER SPOT case colors . . . Add $12.95
.
Note: As of 09-22-19, MATTE BLACK is now the standard build DEFAULT insert color, “No Added Charge”.

*** Custom Call Sign Reverse Laser Engraving (SEEN IN PHOTOS BELOW) is a $39.95 option section, not included with the standard build store pricing.

*** Mouse over slide show to freeze any image . . .

The XD4 II is a small portable unit which has been RUGGIDIZED.

*** OPTIONAL ZOMBIE GREEN case inserts as seen in photos above.

.96 OLED is included (Standard Screen display colors are Yellow-Blue)

Raspberry Pi0-W Motherboard (only) Technical Specs . . .

-On board WiFi and Bluetooth
-Broadcom BCM2835 1GHz processor with 512MB RAM
-Mini HDMI and USB On-The-Go ports
-Micro USB power
-40-pin GPIO connector (20 populated)
-Dimensions: 70mm L x 35mm W x 28mm H
– 8 gb Scandisk micro SDHC card included !

Printed + real time updated on-line instructions included

Note: these units are perfectly suited and in fact specifically designed for the radio operators whom desire a 100% WORKING hot spot out of the box and are not interested in soldering, de-soldering, disk formatting, image burning, configuring a STABLE pi-star software image, bench testing, trouble shooting, and/or generally “fighting tooth and nail” with a fresh new hot spot configuration just to simply talk on and enjoy using their radio transceiver. So hams that truly value their time and wish to avoid all the typical hair pulling set up aggravation issues that flood the various on-line ham radio support pages daily, this unit is specifically designed and BUILT WITH YOU IN MIND🙂

$224.95 (includes .96 OLED Display Screen “Under the Glass” for ultimate display screen protection

“NEX-GEN” Custom Hot Spots Line.

Contact: Bobby @ +1-858-568-6673

email: rc@c-mediagroup.com

BUY NOW: Click Here

Join us on Facebook !!!
www.facebook.com/groups/159237394737919/